6,500 lb. Deluxe Gear Plate Assembly
6,500 lb. Deluxe Gear Plate Assembly
The 6,500 lb. Deluxe Gear Plate Assembly has a lifting capacity of 6,500 lbs. Assemblies include the 10-inch aluminum die-cast hoist pulley, 96-tooth cast iron worm gear assembly, extended block bronze worm assembly and 34-inch drive belt.
There are no steel-on-steel moving parts. It has been assembled and tested by the manufacturer. Lifetime warranty included. You can choose between galvanized steel, 1/4 in. aluminum, 1/2 in. aluminum or powder-coated steel for the backplate. This item ships in a single box.
The extended block worm assembly has a 2-inch bearing block, a worm on a driveshaft, and an aluminum housing with 1/4 inch grease fittings. Attaches directly to the gear plate. The assembly has standard flat-plate mounting holes.
The 96 tooth worm gear assembly comes assembled with the gear, sleeve, backplate bearing, axle sleeve bolt, and snap rings. 1/4 inch easy-reach grease fittings are included. The gear fits standard gear plates used in flat-plate hoists.
The 10 in. Aluminum Die-Cast Hoist Pulley is made from an aluminum die-casting process. Over 15 years of use on BH-USA Flat Plate hoists. They are much stronger in marine environments. They will not swell or bend. The belt-gripping technology on the inside of the pulley prevents belt slippage. Compatible with any known flat-plate hoist. Resistant to warping. Designed to fit drive belts better. The bore is 3/4 inches. Accepts belts up to 1/2 inch.
The AX-34 is a 34-inch drive belt that is compatible with all flat-plate boat hoists from BH-USA. This belt is the perfect length to fit around a 10-inch hoist pulley and to be able to attach it to a 2-inch motor pulley. As the motor’s driveshaft turns, the pulleys turn the belt in order to complete the movement of the hoist.
Gear plates from the Deluxe Series feature cast iron 96 tooth worm gear assemblies and extended block bronze worm assemblies. For the Deluxe series, we use motors up to 1 horsepower.
Never use the same material for both worm gears. The use of steel-on-steel or bronze-on-bronze is not recommended for flat-plate hoists. Return policy.
Standard SeriesName:BH-30BH-40GPA:4,000 lbs4,000 lbsHP:3/41Duty:StandardStandardWorm:BronzeBronze96 Tooth:Cast IronCast IronBlock:ShortShortPulley:SingleSingleDeluxe SeriesName:BH-35BH-45BH-65GPA:6,500 lbs6,500 lbs6,500 lbsHP:3/411Duty:StandardStandardHDWorm:BronzeBronzeBronze96 Tooth:Cast IronCast IronCast IronBlock:ExtendedExtendedExtendedPulley:SingleSingleSingleAdvanced SeriesName:BH-75BH-85GPA:7,500 lbs8,500 lbsHP:1 1/21 1/2Duty:StandardStandardWorm:SteelSteel96 Tooth:BronzeBronzeBlock:ExtendedExtendedPulley:SingleDual
All Flat-Plate Hoists use Elite Motors painted wired boat lift motors.
Specifications
Rated Capacity:6500 lbsTest:Straight-lineDimensions:12 in. L x 24 in. HPlate Thickness:1/4 in. – 1/2 in.Bull Gear Ratio:96:1GPA Warranty:LifetimeExtended Block Worm AssemblyWorm Material:BronzeThread:SingleThread Direction:Right handWorm Diameter:1 3/4 in. Worm Length:2 in.Worm Bore:.754 in.Grease Fittings:3Fitting Size:1/4 in.Dimensions:1 1/4 in. x 1/2 in.Collars Included:2Collar Set Screw:5/16 in.96 Tooth Worm Gear AssemblyMaterial:Cast IronGear Bore:2.875 in.Diameter:12 3/4 in.Hub Depth:2 in.10 in. Pulley & AX-34 BeltMaterial:AluminumType:Die-castHolds:1 beltSize:10 in.Bore:3/4 in.Belt Size:34 in.Type:CoggedHoist Pulley Fits10 in.Motor Pulley Fits:2 in.
Product Overview
6,500 lb. straight line capacity
Assembled and tested under load
No steel-on-steel moving parts
Includes 10 in. hoist pulley & 34 in. belt
Uses cast iron 96 tooth worm gear
Industry-standard mounting holes
Lifetime Warranty
6,500 lb. Deluxe Gear Plate Assembly
The 6,500 lb. Deluxe Gear Plate Assembly has a lifting capacity of 6,500 lbs. Assemblies include the 10-inch aluminum die-cast hoist pulley, 96-tooth cast iron worm gear assembly, extended block bronze worm assembly and 34-inch drive belt.
There are no steel-on-steel moving parts. It has been assembled and tested by the manufacturer. Lifetime warranty included. You can choose between galvanized steel, 1/4 in. aluminum, 1/2 in. aluminum or powder-coated steel for the backplate. This item ships in a single box.
The extended block worm assembly has a 2-inch bearing block, a worm on a driveshaft, and an aluminum housing with 1/4 inch grease fittings. Attaches directly to the gear plate. The assembly has standard flat-plate mounting holes.
The 96 tooth worm gear assembly comes assembled with the gear, sleeve, backplate bearing, axle sleeve bolt, and snap rings. 1/4 inch easy-reach grease fittings are included. The gear fits standard gear plates used in flat-plate hoists.
The 10 in. Aluminum Die-Cast Hoist Pulley is made from an aluminum die-casting process. Over 15 years of use on BH-USA Flat Plate hoists. They are much stronger in marine environments. They will not swell or bend. The belt-gripping technology on the inside of the pulley prevents belt slippage. Compatible with any known flat-plate hoist. Resistant to warping. Designed to fit drive belts better. The bore is 3/4 inches. Accepts belts up to 1/2 inch.
The AX-34 is a 34-inch drive belt that is compatible with all flat-plate boat hoists from BH-USA. This belt is the perfect length to fit around a 10-inch hoist pulley and to be able to attach it to a 2-inch motor pulley. As the motor’s driveshaft turns, the pulleys turn the belt in order to complete the movement of the hoist.
Gear plates from the Deluxe Series feature cast iron 96 tooth worm gear assemblies and extended block bronze worm assemblies. For the Deluxe series, we use motors up to 1 horsepower.
Never use the same material for both worm gears. The use of steel-on-steel or bronze-on-bronze is not recommended for flat-plate hoists. Return policy.
Standard SeriesName:BH-30BH-40GPA:4,000 lbs4,000 lbsHP:3/41Duty:StandardStandardWorm:BronzeBronze96 Tooth:Cast IronCast IronBlock:ShortShortPulley:SingleSingleDeluxe SeriesName:BH-35BH-45BH-65GPA:6,500 lbs6,500 lbs6,500 lbsHP:3/411Duty:StandardStandardHDWorm:BronzeBronzeBronze96 Tooth:Cast IronCast IronCast IronBlock:ExtendedExtendedExtendedPulley:SingleSingleSingleAdvanced SeriesName:BH-75BH-85GPA:7,500 lbs8,500 lbsHP:1 1/21 1/2Duty:StandardStandardWorm:SteelSteel96 Tooth:BronzeBronzeBlock:ExtendedExtendedPulley:SingleDual
All Flat-Plate Hoists use Elite Motors painted wired boat lift motors.
Specifications
Rated Capacity:6500 lbsTest:Straight-lineDimensions:12 in. L x 24 in. HPlate Thickness:1/4 in. – 1/2 in.Bull Gear Ratio:96:1GPA Warranty:LifetimeExtended Block Worm AssemblyWorm Material:BronzeThread:SingleThread Direction:Right handWorm Diameter:1 3/4 in. Worm Length:2 in.Worm Bore:.754 in.Grease Fittings:3Fitting Size:1/4 in.Dimensions:1 1/4 in. x 1/2 in.Collars Included:2Collar Set Screw:5/16 in.96 Tooth Worm Gear AssemblyMaterial:Cast IronGear Bore:2.875 in.Diameter:12 3/4 in.Hub Depth:2 in.10 in. Pulley & AX-34 BeltMaterial:AluminumType:Die-castHolds:1 beltSize:10 in.Bore:3/4 in.Belt Size:34 in.Type:CoggedHoist Pulley Fits10 in.Motor Pulley Fits:2 in.
Product Overview
6,500 lb. straight line capacity
Assembled and tested under load
No steel-on-steel moving parts
Includes 10 in. hoist pulley & 34 in. belt
Uses cast iron 96 tooth worm gear
Industry-standard mounting holes
Lifetime Warranty
6,500 lb. Deluxe Gear Plate Assembly
The 6,500 lb. Deluxe Gear Plate Assembly has a lifting capacity of 6,500 lbs. Assemblies include the 10-inch aluminum die-cast hoist pulley, 96-tooth cast iron worm gear assembly, extended block bronze worm assembly and 34-inch drive belt.
There are no steel-on-steel moving parts. It has been assembled and tested by the manufacturer. Lifetime warranty included. You can choose between galvanized steel, 1/4 in. aluminum, 1/2 in. aluminum or powder-coated steel for the backplate. This item ships in a single box.
The extended block worm assembly has a 2-inch bearing block, a worm on a driveshaft, and an aluminum housing with 1/4 inch grease fittings. Attaches directly to the gear plate. The assembly has standard flat-plate mounting holes.
The 96 tooth worm gear assembly comes assembled with the gear, sleeve, backplate bearing, axle sleeve bolt, and snap rings. 1/4 inch easy-reach grease fittings are included. The gear fits standard gear plates used in flat-plate hoists.
The 10 in. Aluminum Die-Cast Hoist Pulley is made from an aluminum die-casting process. Over 15 years of use on BH-USA Flat Plate hoists. They are much stronger in marine environments. They will not swell or bend. The belt-gripping technology on the inside of the pulley prevents belt slippage. Compatible with any known flat-plate hoist. Resistant to warping. Designed to fit drive belts better. The bore is 3/4 inches. Accepts belts up to 1/2 inch.
The AX-34 is a 34-inch drive belt that is compatible with all flat-plate boat hoists from BH-USA. This belt is the perfect length to fit around a 10-inch hoist pulley and to be able to attach it to a 2-inch motor pulley. As the motor’s driveshaft turns, the pulleys turn the belt in order to complete the movement of the hoist.
Gear plates from the Deluxe Series feature cast iron 96 tooth worm gear assemblies and extended block bronze worm assemblies. For the Deluxe series, we use motors up to 1 horsepower.
Never use the same material for both worm gears. The use of steel-on-steel or bronze-on-bronze is not recommended for flat-plate hoists. Return policy.
Standard SeriesName:BH-30BH-40GPA:4,000 lbs4,000 lbsHP:3/41Duty:StandardStandardWorm:BronzeBronze96 Tooth:Cast IronCast IronBlock:ShortShortPulley:SingleSingleDeluxe SeriesName:BH-35BH-45BH-65GPA:6,500 lbs6,500 lbs6,500 lbsHP:3/411Duty:StandardStandardHDWorm:BronzeBronzeBronze96 Tooth:Cast IronCast IronCast IronBlock:ExtendedExtendedExtendedPulley:SingleSingleSingleAdvanced SeriesName:BH-75BH-85GPA:7,500 lbs8,500 lbsHP:1 1/21 1/2Duty:StandardStandardWorm:SteelSteel96 Tooth:BronzeBronzeBlock:ExtendedExtendedPulley:SingleDual
All Flat-Plate Hoists use Elite Motors painted wired boat lift motors.
Specifications
Rated Capacity:6500 lbsTest:Straight-lineDimensions:12 in. L x 24 in. HPlate Thickness:1/4 in. – 1/2 in.Bull Gear Ratio:96:1GPA Warranty:LifetimeExtended Block Worm AssemblyWorm Material:BronzeThread:SingleThread Direction:Right handWorm Diameter:1 3/4 in. Worm Length:2 in.Worm Bore:.754 in.Grease Fittings:3Fitting Size:1/4 in.Dimensions:1 1/4 in. x 1/2 in.Collars Included:2Collar Set Screw:5/16 in.96 Tooth Worm Gear AssemblyMaterial:Cast IronGear Bore:2.875 in.Diameter:12 3/4 in.Hub Depth:2 in.10 in. Pulley & AX-34 BeltMaterial:AluminumType:Die-castHolds:1 beltSize:10 in.Bore:3/4 in.Belt Size:34 in.Type:CoggedHoist Pulley Fits10 in.Motor Pulley Fits:2 in.
Product Overview
6,500 lb. straight line capacity
Assembled and tested under load
No steel-on-steel moving parts
Includes 10 in. hoist pulley & 34 in. belt
Uses cast iron 96 tooth worm gear
Industry-standard mounting holes
Lifetime Warranty